Produse pentru allpred hidro dm (18)

Used to make filling primers for HYDRONYLON ® HN on bituminous felt substrates. CONSUMPTION: 2 kg/m 2 – using SW-1 technical mesh APPLICATION: Apply the first layer of HYDRONYLON ® HP on the prepared substrate using a brush or broom . After the first layer has dried, apply the second layer of HYDRONYLON ® HP through a SW-1 technical mesh (it is also permissible to apply the first layer of HYDRONYLON ® HP directly on the prepared substrate through a SW-1 technical mesh). The base coat should be made in at least two layers. PACKAGING:25 kg COLOUR:Grey

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Hydrotherapy is the naturist medicine branch based on the external use of water in therapeutic and prophilactic purpose. The hydro-massage acts as a manual massage, relaxing the muscles and distending the blood vessels. It is attained by lateral water-air jets. The air-massage is produced by the air bubbles, which stimulate the skin receptors, reduces the muscles pressure and relaxes; another benefic effect is the skin regeneration, refreshing the entire organism. The natural massage produced by water and air movement is realised today with the help of technology. Belform bathtubs can be equiped at request, depending on the model choosen, with diversified AquaJet Italia hydro-massage versions, equiped with Italian or Spanish production pumps.

Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

DCP Biomex HDI 5L is een supergeconcentreerde 2-in-1 reiniger en ontvetter die een superieure reinigingskracht biedt. Deze biologisch afbreekbare en milieuvriendelijke formule is geschikt voor een breed scala aan toepassingen, waaronder onderdelen wassen, hogedruk- en stoomreiniging, ultrasoon en dompelbaden, sprayen en borstelen. Het product is veilig te gebruiken op alle metalen, inclusief aluminium en titanium, en werkt corrosieremmend op aluminium oppervlakken. Vrij van chloor- en petroleumoplosmiddelen, bleekmiddel, ammoniak, bijtende middelen, fosfaten, fosfonaten, NTA en EDTA, biedt DCP Biomex HDI 5L een veilige en effectieve reinigingsoplossing voor diverse industrieën. DCP Biomex HDI 5L is de ideale keuze voor bedrijven die op zoek zijn naar een krachtige en veelzijdige reiniger.

“Low chem” solution for Conventional Positive plates Recommended for Dark and Variant plate

Für ADLER Pigmocryl und ADLER Aquawood Protect und Aquawood Protor. Aqua-PUR-Härter Auftragsart Informationen über Einsatz, Zugabemenge und Topfzeit sind in den Merkblättern der entsprechenden wasserbasierten ADLER Möbellacke enthalten.

Properties: ALDOVET SAN is a special surface disinfectant concentrate on an excellent bactericidal, fungicidal, and virucidal effect. ALDOVET SAN is very well suited for the disinfection of surfaces and equipment in livestock barns, as well as for working surfaces, sanitary facilities, and animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET SAN is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

ELKALUB LFC 92100 und ELKALUB LFC 921000 sind Schmieröle auf Basis synthetischer Kohlenwasserstoffe. Die hochwertigen Grundöle sind für den hohen Viskositätsindex verantwortlich, gewährleisten eine hervorragende Alterungsbeständigkeit auch bei hohen Temperaturen und eine sehr gute Schmierwirkung. Die ausgewogene Additivierung unterstützt diese Eigenschaften und sorgt für einen guten Verschleißschutz und einen hervorragenden Korrosionsschutz. Dies ist ein Sonderprodukt, welches auf Nachfrage individuell für Sie produziert werden kann. Mindermengen können gelten. Sprechen Sie uns einfach an.

1/4" - 3/8" Zoll, Rohrdurchmesser: 5 – 14 mm Größe (L x B x H) mm: 96 x 57 x 64

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability. Maximum thickness per layer:1mm Minimum total thickness:2mm Consumption:1.25 kg/m2 and mm thickness

Construction Primer C

The performance of a true cure, hardener and densifier in a single application.

Eine besondere Anwendung der Druckluft-Blasentechnik ist die Geschwemmselanlage. Durch erhöhten Einsatz der Luftmenge bildet sich an der Wasseroberfläche eine starke Strömung, die eine Barriere für Treibgut (Äste, Zweige, Tüten etc.) bildet.

liquid roof coating kit . PACKAGING:5kg, 25kg CONSUMPTION:0.25 kg/m2 COLOUR:graphite

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.

Mortier flexible monocomposant qui protège et imperméabilise tous types de surfaces de construction, béton ou mortier en présence d'eau ou d'humidité. Sa flexibilité lui permet de couvrir les microfissures qui se forment dans le béton soumis à la déformation. Forte adhérence, imperméabilité, aucun retrait et excellente maniabilité. Épaisseur maximale par couche:1mm Épaisseur totale minimale:2mm Consommation:1,25 kg/m2 et mm d'épaisseur